Virtual Learning

M48

Fatigue Analysis from Finite Element Calculations

Consider the fatigue strength of your components and structures early in the design stage,
from finite element results post-processing.

Sign Up Now

Objectives:

Upon completion of the training, participants will be able to:

  • Build a finite element model suitable for fatigue analysis
  • Know different fatigue life approaches for simple and complex loadings
  • Apply these approaches to evaluate the fatigue strength of mechanical components or structures.

Date:

7th – 10th March 2023

Time:

Summer: 14:00 – 17:00 (GMT+8) / Winter: 15:00 – 18:00 (GMT+8) Singapore
08:00 – 11:00 (GMT+1) France

Pre-requisites:

Good understanding and knowledge of material strength and finite element analysis.

Educational Approach:

Teaching alternating theory and practice through exercises and case studies. Please bring along a scientific calculator.

Who should attend:

Engineers and technicians from Design and Simulation departments, in charge of strength calculations and aiming to optimize their structures for fatigue.

Course outline:

  • Good practices in finite element modelling for fatigue post-processing: modelling rules, global analysis and postprocessing options.
  • Stress-Life approach for high cycle fatigue.
  • Strain-Life approach for low cycle fatigue.
  • Multiaxial loadings analysis.
  • Fatigue of welded structures: seam welds hot spot and notch stress approaches, introduction to spot welds analysis.
  • Conclusion

Trainer

This course will be carried out by Philippe AMUZUGA.

Philippe AMUZUGA

Philippe is a Structural Analysis Engineer of CETIM (Technical Institute of the French mechanical industry). He works mainly in the field of steel construction, and more particularly on designing and sizing by the digital chain. Specialized in structural and contact fatigue, he applies and develops advanced analysis tools to correlate and valorize test results with numerical models..

His fields of interest cover structural analysis based on FEA (Abaqus, Ansys) and fatigue analysis (nCode), dealing with strength of structures or mechanical components and training for knowledge transfer to industry.

Areas of Expertise

  • Fatigue of mechanical components
  • Contact fatigue
  • Digital Twinning and Model Reduction
  • Residual Life of Structures and Equipment
  • Training (Fatigue analysis based on finite element calculations).

Profile

Career: 3 years as Mechanical Structure Analysis Engineer at SKF Aerospace (semi-analytical modeling to solve heterogeneous elastic-plastic contact problems in hybrid bearings) 3 years as a structural engineer at CETIM, since 2017.
Graduate: Mechanical Engineering—Fatigue (PhD, INSA-Lyon, 2016)

VIRTUAL LEARNING REGISTRATION FORM

Course Name

M48: Fatigue Analysis from Finite Element Calculations

Course Date:

7th – 10th March 2023

Time:

(Summer) 14:00 – 17:00 / (Winter) 15:00 – 18:00 (GMT+8) Singapore 08:00 – 11:00 (GMT+1) France

Closing Date:

21st February 2023, Tuesday

Course Fee:

SGD 1,200.00 OR EUR 730.00 OR USD 900.00 per person (exclude GST)

Early Bird:

Registration must reach us on or before 7th February 2023, Tuesday:
SGD 1,080.00 OR EUR 660.00 OR USD 810.00 per person (exclude GST)

We welcome groups to attend our trainings. Please contact us for a group discount package.

Our Accounts will advise if GST is applicable. Participants shall bear all bank charges.
Learners must fulfill at least 75% attendance and pass all assessment components, to be awarded with a Certificate of Attendance (COA).

For clarification or inquiries please contact Mrs Lorraine HUANG or Joshua LEE at +65 67788285 or send an email to training@cetim-matcor.com

Registration Form

To register for the course, please complete this form.

Payment Details:

  • Registration form and course fees are to reach MATCOR before the closing date.
  • Registration will only be confirmed upon full payment.
  • Direct internet banking payment to MATCOR Technology & Services Pte Ltd, Bank: Development Bank of Singapore, Bank Code: 7171, Branch Code: 032, Swift Code: DBSSSGSG, Bank Address: 1 Kim Seng Promenade, #02-32, Great World City, Singapore 237994, Account / Iban No: 032-004152-3. / PAYNOW: UEN199201190R
  • All cheques should be made payable to “MATCOR Technology & Services Pte Ltd” and mailed to 3 Seletar Aerospace Link Singapore 797550, Or
  • Overseas participants may choose to pay in EUR or USD.
  • Participants shall bear all bank charges for payments.

For clarification or inquiries please contact Mrs Lorraine HUANG or Joshua LEE at +65 67788285 or send an email to training@cetim-matcor.com

Cancellation & Refund:

  • Any cancellation made after closing date – no refund, but delegate substitution is allowed.
  • Any cancellation made before closing date will receive full refund.
  • MATCOR reserves the right to cancel or reschedule the course, only if deemed necessary