WG15B

Machine safety: design of control system and safety functions

Master Validate and justify technological choices relating to PLCs and electrical circuits, in light of health and safety requirements.

Objectives:

  • present the health and safety requirements to be respected for the design or modification of a control system for machinery
  • explain how to properly dimension a safety function
  • cite the main regulations and standards currently enforced in this area.

Date:

8th – 11th March 2022 (4Days)

Time:

15:00 – 18:30 (GMT+8) Singapore / 08:00 – 11:30 (GMT+2) Paris

Pre-requisites

No technical pre-requisites

Pedagogical Means

  • Case studies.
  • Presentation of currently applicable standards.
  • Presentation illustrated by several examples from the instructor’s personal experience.
  • Discussions between instructor and trainees throughout the course, to provide perspective about the presented points using actual industrial cases presented by the trainees.

Who should attend:

Engineers and technicians from the design, process engineering and safety departments

Course outline:

>> Fully understand the health and safety requirements for handling risks relating to the control system (emergency stop, operating mode, inhibition of safety devices, etc.).

>> Learn to design safety functions according to standard EN ISO 13849-1 (2016):

  • link between risks and control system, the other baselines (EN62061, IEC 61508)
  • control system categories
  • quality of components, diagnostics level and validation of redundancy
  • steps in the design and validation of baselines

>> Presentation of the Sistema software tool

  • SIStema organisation and tree structure, breakdown of safety function into sub-blocks (SB)
  • use of libraries (SIStema and VDMA)
    hardware modelling and software validation
    preparing and reading reports

>> Apply learned principles based on examples of safety functions:

  • safety-related stop
  • monitoring of moving guard with PLC
  • Two channel output with no test (no Category 3 or 2 validation)
    non-physical barrier, sequencing of cycles via re-activation
    hydraulic protective devices controlled by safety PLC.

Trainer

Max DELLERUELLE

Max DELERUELLE is a design consultant for machine safety. His areas of work concern all regulatory aspects of machinery directives, in particular risk analysis and conformity evaluations.
In particular, he works in the field of instrumentation & control, electricity, automated systems and robotics. He participates in several national and European workgroups concerning collaborative robotics.

Areas of Expertise

Project management

  • Pre-design monitoring, design reviews, liaising with participants,
  • Preparation of specifications for pre-design and equipment subcontracting, tenders, purchasing and acceptance.

Electrical engineering and automation

  • Schematic and detailed diagrams for power, control and instrumentation systems.
  • Functional analysis, PLCs, control loops, monitoring and robotics.

International experience

  • English as the working language for exports (Canada, China, Russia, India, Norway).
  • Monitoring of foreign subsidiaries (Russia and China) and local subcontractors.

Instructor

  • Regulatory technical requirements, new and previously-owned machinery,
  • Risk analysis, IDAR method,
  • Design of control systems.

Profile

  • 20 years of experience
  • CETIM (since 2015)
  • BROCHOT Special Machinery (1998 – 2015)
  • ERSTEIN sugar refineries (1997 – 1998)
  • Services: safety training/consulting (Machinery Directive 2006/42/EC) and risk analysis (IDAR)
  • Pre-design studies: validation of electrical safety functions and PLCs (per ISO 13849)
  • Diploma from ENI Metz – General Mechanics

VIRTUAL LEARNING REGISTRATION FORM

Course Name

WG15B Machine safety: design of control system and safety functions

Course Date:

18th – 21st October 2022

Time:

14:.00 to 17:50 (GMT +8) Singapore / 09:00 – 11:30 (GMT+2) Paris
total 14 hours

Closing Date:

5th Oct 2022, Wednesday

Virtual Learning:

A link to join the Virtual Learning will be sent to you upon confirmation and receipt of fees. 

Limited seats are available for best results

Registrations will be confirmed in writing and is subject to availability 

Course Fee:

SGD 1,400.00 OR EUR 850.00 OR USD 1,040.00 per person (exclude GST)

Early Bird:

Registration must reach us on or before 21st Sept 2022, Wednesday
SGD 1,260.00 OR EUR 770.00 OR USD 940.00 per person (exclude GST)

We welcome groups to attend our trainings. Please contact us for a group discount package.

Our Accounts will advise if GST is applicable. Participants shall bear all bank charges.

Learners must fulfill at least 75% attendance and pass all assessment components, to be awarded with a Certificate of Attendance (COA).

For clarification or inquiries please contact Ms. Pei Shyan NG or Joshua Lee at +65 67788285 or send an email to training@cetim-matcor.com

Registration Form

To register for the course, please complete this form.

Payment Details:

  • Registration form and course fees are to reach MATCOR before the closing date.
  • Registration will only be confirmed upon full payment.
  • Direct internet banking payment to MATCOR Technology & Services Pte Ltd, Bank: Development Bank of Singapore, Bank Code: 7171, Branch Code: 032, Swift Code: DBSSSGSG, Bank Address: 1 Kim Seng Promenade, #02-32, Great World City, Singapore 237994, Account / Iban No: 032-004152-3. / PAYNOW: UEN199201190R
  • All cheques should be made payable to “MATCOR Technology & Services Pte Ltd” and mailed to 3 Seletar Aerospace Link Singapore 797550, Or
  • Overseas participants may choose to pay in EUR or USD.
  • Participants shall bear all bank charges for payments.

For clarification or inquiries please contact Ms. Pei Shyan NG or Joshua Lee at +65 67788285 or send an email to training@cetim-matcor.com

Cancellation & Refund:

  • Any cancellation made after closing date – no refund, but delegate substitution is allowed.
  • Any cancellation made before closing date will receive full refund.
  • MATCOR reserves the right to cancel or reschedule the course, only if deemed necessary