Version 6.5 of the leading bolted joint software includes a module to convert an analytical project into a finite element project, which can be used without advance knowledge in this field.
OGA 2023 will take place from 13 – 15 September at Kuala Lumpur Convention Centre, marking its 19th edition as Southeast Asia’s largest trade show for the oil, gas and petrochemical engineering industry.
Gastech is at the heart of the natural gas, LNG, hydrogen, low-carbon solutions, and climate technology conversation. A landmark event in the energy industry’s calendar for over 50 years, Gastech 2023 is the world’s largest meeting place for natural gas, LNG, hydrogen, low-carbon solutions, and climate technologies.
The Institute of Materials, Malaysia (IMM) is organizing a Conference on Materials Failure Investigation in conjunction with the International Conference on X-rays & related Techniques in Research & Industries 2023 organized by Universiti Teknologi Malaysia (UPM).
Cetim offers manufacturers the use of its equipment and expertise for scanning, reverse engineering and the creation of added value based on the generated digital models. In this article, read an interview with our experts on the broad needs of manufacturers in scanning in all aeras, and the Centre’s strengths in meeting them.
The new machine acquired by Cetim will break records in tape laying speed for the production of composite tanks. Its core area of focus is the manufacture of hydrogen tanks for clean mobility.
Discover the “value chain” training approach offered by Cetim to anticipate the upskilling of employees and guarantee controlled management of training plans.
Cetim introduces a new way of approaching employee skills development by offering a value chain view of training. This new approach allows companies to quickly visualise all the training and skills required to successfully integrate plastics and composites into their applications.
Cetim is the winner of the JEC Composites Innovation Awards 2023, in the “Aerospace – Process” category, for the manufacture of a Krueger flap designed in thermoplastic composite, within the framework of the European R&D project SWING*, part of the European Clean Sky 2 programme, for more efficient wings and more efficient aircraft.
Besides the product or system breakage aspect, the methodologies of failure analysis can be used as part of a risk management approach and a real driver of progress.
The European THOR project, intended to produce thermoplastic composite tanks for hydrogen vehicles, has made significant progress towards the mass production of such components.
To carry out the retrofit under the best possible conditions, the American start-up asked Cetim to fully recreate the digital mock-up of an airplane. Watch the high level scan in a new video !
Centre for scientific and technical studies of Aquitaine regularly relies on Cetim’s expertise and testing equipment to validate the performance of threaded connections included in the nuclear warheads used for France’s nuclear deterrent.
Safran Landing Systems asked Cetim to validate the tightening specifications for the bolted joints of landing gear wheels and brakes.
Safran has launched its Explore H2 program to spot and support startups and forge cooperation for its hydrogen-related R&T and innovation projects.
Singapour a développé une base industrielle diversifiée, occupant une position de leader dans des secteurs tels que l’aéronautiqu…
Dassault Aviation and Cetim signed a framework agreement last June concerning the manufacturing of composite specimens and tomography controls of large-sized parts for a 5 year period.
This AM Webinar, organised by Cetim-Matcor, aims to provide decision-makers and engineers with the necessary technical and economic background on the major metal AM processes (over 7), allowing them to make strategic and educated decisions on which technology is best suited for their business.
Discover a customized support throughout the entire value chain, from innovation to recycling and training, to improve the performance of your products!
Cetim and Cetim Maroc are pleased to announce their participation to the 6th edition of AEROSPACE MEETINGS CASABLANCA…
The 1st edition of the International Metal Additive Manufacturing Symposium at Cetim, Senlis, France.
Are you looking for a key partner to support you with the best practices & technologies to get on board the aerospace of the future ?
Thales called on Cetim’s expertise to check the leak-tightness of the laser equipping the Supercam, the Perseverance rover’s “eyes” on …
Industry 4.0 To prepare their students for the world of tomorrow, the University of Hyogo Japan has chosen Cetim as …
A new training session has been added to the Cetim Academy catalogue, focusing on the techniques used to effectively model …
Learning to combine fatigue analysis with finite element calculations
On the agenda: 13 free webinars open to everyone, to discover or review the latest progress in the key technologies …
The programme of the Cetim Academy International Web-discoveries for 2021 is now online!
The European project provides a response to the need of engine manufacturers to extend the field of observation and control …
VibSEA: controlling high frequency vibrations of aircraft engines
PaCE@NTU and Cetim collaborate to strengthen the knowledge of mechanical industries with specific series of professional training The Centre for …
Parker Hannifin carefully selected the characteristics of the components of its new range of motor-driven air-oil heat exchangers. The acoustic …
Kuala Lumpur, 22 February 2021 – The Malaysian Investment Development Authority (MIDA) is partnering with CETIM (the French leading Technical Centre …
GOING FOR THE FUTURE … Cetim, the French Technical Centre for Mechanical Industries, was established in 1965 to support innovation …
Access the replay of our Webinar led during Aeromart #Digital2020 “How French Mechanical Industry supports the Future European Aerospace Research …
French Mechanical Industry supports the Future European Aerospace Research towards Green Aviation
The engine designed to power the next generation of launchers of the aerospace group passed its first ignition tests. It is equipped …
A roaring start for ArianeGroup’s Vulcain 2.1 engine… with a bit of help from Cetim!
This seventh electrodynamic vibrator extends Cetim’s shock and vibration testing capabilities. Watch this video for a detailed description of its …
Following the success of the operation launched in May 2020, and to respond to the needs of International companies, Cetim …
Cetim Academy training web-discoveries and virtual classes available now in English !
The ninth edition of Fatigue Design is scheduled to take place on 17 and 18 November 2021 in Senlis, France. …
It’s official! The next edition of FAN, the international conference on “fan noise, aerodynamics, applications and systems” will be held from 14 to …
Explore new advanced solutions for your manufacturing needs – from low-volume prototyping to mid-volume runs of complex metal parts ! Cetim, …
Cetim and Desktop Metal partner to accelerate the adoption of global Metal Additive Manufacturing
The new version of Cetim Cobra, the world leader for bolted joint design and failure analysis has been released! This …
Cetim Cobra: new version of the powerful solution for bolted & secured joint analysis
The aim of the Clean Sky project Palace is to develop a new pump architecture to equip the cooling systems …
Next generation of aircraft generators : Palace, the European project, is unveiled !
What if nuts could talk? With its latest innovation, JPB Système, the specialist manufacturer of fastener solutions for the aerospace industry, …
Intelligent aircraft fasteners : IoT in tightening solutions
Following the maiden move and the signing of an exploratory agreement during JEC Asia 2017, Cetim, the French Technical Center …
To accelerate Singapore aerospace companies to upgrade their additive manufacturing skills, especially with regards to inspection and post-processing, NAMIC, the …
Additive manufacturing: Exclusive Training Courses in Singapore. Register now !