OUR TRAININGS
At Matcor, a CETIM Company, we aim not only to provide excellent services but also to impart our knowledge to parties in the relevant industries. Through a wide range of courses, participants will acquire both theoretical knowledge as well as hands-on experience with real-life case studies to ensure a deeper understanding of the particular course attended.
With trainers, having had valuable industry experience, course participants can be assured that they are being taught by leading experts in the respective fields.
Search courses by category
FAILURE ANALYSIS
INDUSTRY 4.0
MANUFACTURING PROCESS
MATERIAL DESIGN
MTS 06 Classroom Training
Gears: Definition, Manufacturing, Control and Implementation
Discover the key elements needed to achieve quality gears and be more efficient in your discussions with experts.
Schedule 2020: 25th Nov – 26th Nov
Register NowMTS 01 Classroom Training
Corrosion Engineering Course
This 2- day interactive training provides general concepts of recognizing corrosion problems, establishing causes of corrosion and selection of corrosion control methods.
Schedule 2020: TBA
Register NowMTS 04 Classroom Training
Failures of Shafts, Gears and Bearings
Understand the causes of failures of power transmission components to better avoid them.
Schedule 2020: 8th – 10th Dec
Register NowMTS 02/03 Classroom Training
Failure and Damage Mechanisms of Pressurized Equipment in General Part I (2-day)
Failure and Damage Mechanisms of Pressurized Equipment in Refining/Petrochemical Industries Part II (1-day)
Deeper understanding of the failure and damage mechanisms through case studies, comprehensive presentation of metallurgical and scientific evidence with explanation of the fundamentals behind the respective mechanisms.
Schedule 2020: TBA
Register NowMTS 05 Classroom Training
Gears Failure and Tribology of Gears
Understand gear failures and tribology of gears to avoid disruptions to operations.
Schedule 2020: 28th – 29th Oct
Close For RegisterResidual Life Assessment of structures and equipment
Web Discovery
Problematics, relevant references, and good practice for evaluating the Residual Life of your machines and of various equipment
In the industrial world, there is a very large number of structures, machines, or components for which Residual (remnant) Life Assessment (RLA) is needed.
Schedule 2020:
TBAOverview of Leak Test Methods
Web Discovery
Overview of the different tracer gas and pressure variation leak test measurement methods
The aim of this presentation is to give a brief overview of leak phenomena, and describe the different methods to measure and locate a leak.
Schedule 2020:
TBAFluidic networks: Understand Failures and Optimize Equipment
Web Discovery
Presentation of different damages occurring on fluidic networks, the reasons of their occurring and the means to prevent them.
Schedule 2020:
TBAStatic Sealing Systems Overview
Web Discovery
Overview of the different static sealing systems and their use under different service conditions
Schedule 2020: TBA
TBAAsset Integrity Management & Lifetime Extension of Ageing Equipment
Web Discovery
Reducing CAPEX and OPEX by an appropriate way to manage the integrity of your assets
Schedule 2020: 3rd Dec
Register Now (FREE)New Trends in Plastics and Composites Recycling
Web Discovery
Innovative eco-processes Thermosaïc® & ThermoPRIME® to upcycle composite and plastic waste, and face new recycling challenges
Schedule 2020 – 6th Oct, Tue
Register Now (FREE)Composites: Materials / Process and Defects Analysis
Web Discovery
An overview of composite materials, their properties, the related manufacturing processes and main defects encountered
Schedule 2020:
TBAMTS08
Onsite Training
Failure Analysis and Investigation
fundamentals and practical approach of forensic investigation, the various modes and causes of failures to better understand the macro and micro aspects of engineering components
Schedule: Onsite Training
Register NowFA 03 Virtual Learning (1st run)
Design Process for Metal Additive Manufacturing
A comprehensive training program on the main processes of design in metal
additive manufacturing technologies.
Schedule 2020: 20th – 22th Oct, Tue, Wed & Thu (3 days)
Close for RegisterFA 11 Classroom Training
Additive Manufacturing: How to Integrate it Into Your Production
Know when to subcontract or purchase your own equipment, assess the economic and organizational impact and run your project to incorporate additive manufacturing process into your production process.
Schedule 2020: TBA
FA 88-1 & 2 Classroom Training
Control & Post-Processing
Successfully Integrate Additive Manufacturing into your Operations.
Schedule 2020: TBA
Register NowFA 88-3 Classroom Training
Qualification
Successfully Integrate Additive Manufacturing into your Operations.
Schedule 2020: TBA
FA 89 Classroom Training
Part 2 – Additive Manufacturing
Consultancy Services: Leading to Qualifications & Production
We help companies involved in development projects in Additive Manufacturing:
In the choice of the best additive manufacturing process
In the development of the production and it’s qualification
On the justification of compliance with the standards or regulations
Schedule 2020: TBA
Register NowWG10 Virtual Learning
Innovate on your products
Understand and implement an eco-design approach
Schedule 2020: 23th – 26th Nov, Mon-Thu (4 days)
Register NowFA 01 Virtual Learning
Additive Manufacturing Processes for Polymer and Metal Applications
A complete understanding of Additive Manufacturing technologies bound to integrate the benefits of these innovation on lead time reduction, complex shapes, prototyping for new products.
Schedule 2020: 8th & 9th Dec, Tue & Wed (2 days)
Register NowFA 03 Virtual Learning
Design Process for Metal Additive Manufacturing
A comprehensive training program on the main processes of design in metal
additive manufacturing technologies.
Schedule 2021: 12 – 14th Jan
Register NowYour 4.0 Web Discovery
Transformation Journey
CETIM will provide empowering and comprehensive 4.0 drivers to drive transformation through your organization
Schedule 2020:
TBAFA 11 Classroom Training
Additive Manufacturing: How to Integrate it Into Your Production
Know when to subcontract or purchase your own equipment, assess the economic and organizational impact and run your project to incorporate additive manufacturing process into your production process.
Schedule 2020: TBA
Register NowS18 Classroom Training
Machining Using 5-Axis Multi-function Machines
The latest 5-axis multifunction machines increase your competitiveness. Give your technicians the knowledge they need to make full use of these technologies and produce parts by adopting suitable strategies for this new equipment.
Schedule 2020: TBA
Register NowM 12 Classroom Training
Tribology Friction, Wear and Lubrication of Mechanical Parts
Master the concepts of tribology to optimize the design and maintenance of your mechanical parts that are subjected to friction and wear.
Schedule 2020: TBA
Register NowFA 88-1 & 2 Classroom Training
Control & Post-Processing
Successfully Integrate Additive Manufacturing into your Operations.
Schedule 2020: TBA
Register NowFA 88-3 Classroom Training
Qualification
Successfully Integrate Additive Manufacturing into your Operations.
Schedule 2020: TBA
Register NowFA 89 Classroom Training
Part 2 – Additive Manufacturing
Consultancy Services: Leading to Qualifications & Production
We help companies involved in development projects in Additive Manufacturing:
In the choice of the best additive manufacturing process
In the development of the production and it’s qualification
On the justification of compliance with the standards or regulations
Schedule 2020: TBA
Register NowF06 Classroom Training
Cleaning and Cleanliness of Parts
Implement a cleanliness management in order to make cleanliness a performance lever.
Schedule 2020: TBA
Register NowWEL 02 Virtual Learning
Reach & Rohs: European Regulations
Compliance with REACH & ROHS regulations. Specially adapted for companies based
outside the EU. Learn how to apply it effectively
Schedule 2020: 5, 12, 26 Nov & 3 Dec, Thursday, (4 Days)
Close For RegisterCL 01 Virtual Learning (New)
Crane Design in Accordance with EN 13001 Series of Standard
Master the scientific basis and the essential rules of crane design, in accordance with EN 13001 series of standards (with equivalent ISO standards)
Schedule 2020: 14th-18th Dec
Register NowMTS 06 Classroom Training
Gears: Definition, Manufacturing, Control and Implementation
Discover the key elements needed to achieve quality gears and be more efficient in your discussions with experts.
Schedule 2020: 25th Nov – 26th Nov
Register NowM 12 Classroom Training
Tribology Friction, Wear and Lubrication of Mechanical Parts
Master the concepts of tribology to optimize the design and maintenance of your mechanical parts that are subjected to friction and wear.
Schedule 2020: TBA
Register NowEF 01 Classroom Training
Structure Analysis Initiation with Finite Element Model
Use finite element analysis for dimensioning structures
Schedule 2020: TBA
Register NowRDM 02 Virtual Learning
Material Resistance and Sizing Level 2
Use the advanced notions of strength of materials to check the resistance of structures to
buckling and fatigue phenomena.
Schedule 2020: 23rd -26th Nov, Mon-Thu (4 days)
Register NowL 70 Virtual Learning
Sealing of Flanged Joints
Integrate the leak-tightness factor as of the design stage by using the appropriate procedures, knowing the properties of the seals and by applying the appropriate design analysis method.
Schedule 2020: 2nd, 4th & 5th Nov, Mon, Wed & Thu (3 days)
Close for RegistrationM 48 Virtual Learning
Fatigue Analysis from Finite Element Calculations
Consider the fatigue strength of your components and structures early in the design stage,
from finite element results to post-processing.
Schedule 2020: 10th – 13th Nov, Tue-Fri (4 days)
Register NowL 67 Classroom Training
Tight Bolted Joints Using EN 1591 Design Method
Design bolted flange joints according to the tightness level requirement by applying the theoretical and practical (case studies) knowledge of the European calculation standard series EN 1591.
Schedule 2020: TBA
Register NowMTS 07 Classroom Training
Composite Materials
In-depth Knowledge Transfer of Composite Materials from Manufacturing, Remaining Life Assessment to Failure Analysis
Schedule 2020: TBA
Register NowK72 Virtual Learning
Threaded Assemblies Essential Design Rules
Essential rules for the design of bolted assemblies
Schedule 2020: TBA
Close to RegisterNew Trends in Plastics and Composites Recycling
Web Discovery
Innovative eco-processes Thermosaïc® & ThermoPRIME® to upcycle composite and plastic waste, and face new recycling challenges
Schedule 2020: 6th Oct, Tue
Register Now (FREE)Introduction to Fatigue of Materials
Web Discovery
Short initiation to fatigue of materials
Schedule 2020: TBA
TBAComposites: Materials / Process and Defects Analysis
Web Discovery
An overview of composite materials, their properties, the related manufacturing processes and main defects encountered
Schedule 2020 – 20th Oct, Tue
Register Now (FREE)Training Schedule
| REF | PROGRAMS | SCHEDULE 2020 | TIME (GMT+8) | EARLY BIRD | CLOSING DATE |
|---|---|---|---|---|---|
| MTS 05 | Classroom Training Gear Failures and Tribology of Gears Close for Registration |
28 Oct to 29 Oct |
8.30 to 5.30 pm | 29-Sep-20 | 28-Sept-20 |
| L 70 | Virtual Learning Sealing of flanged joints Close for Registration |
2, 4 & 5 Nov Mon, Wed & Thu (3 Days) |
3.30 to 6.30 pm | 2-Oct-20 | 20-Oct-20 |
| WEL02 | Virtual Learning Reach & Rohs Close for Registration |
5, 12, 26 Nov & 3 Dec Thursday (4 Days) |
4.30 to 6.30 pm | 1-Oct-20 | 22-Oct-20 |
| M48 | Virtual Learning Fatigue Analysis from Finite Element Calculations |
10, 11, 12 & 13 Nov Tue to Fri (4 Days) |
3.30 to 6.30 pm | 9-Oct-20 | 28-Oct-20 |
| WG10 | Virtual Learning Innovate on your products: understand and implement an eco-design approach |
23, 24, 25 & 26 Nov Mon - Thu (4 Days) |
3.30 to 7.00 pm | 23-Oct-20 | 10-Nov-20 |
| RDM 02 | Virtual Learning Material Resistance and Sizing Level 2 – Improvement |
23, 24, 25 & 26 Nov Mon - Thu (4 Days) |
3.30 to 6.30 pm | 23-Oct-20 | 10-Nov-20 |
| MTS 06 | Classroom Training Gears: Definition, , Manufacturing, Control and Implementation |
25 to 26 Nov (2 Days) |
8.30 to 5.30 pm | 9-Oct-20 | 30-Oct-20 |
| WD9 | Web Discovery Asset Integrity Management & Lifetime Extension of Ageing Equipments |
3 Dec | 4.30pm to 6.00pm | - | 20-Dec-20 |
| FA 01 Final Run |
Virtual Learning Additive Manufacturing: Control-Laser Bean Melting |
8 - 9 Dec Tue & Wed (2 days) |
3.00 pm to 7.00 pm | 10-Nov-20 | 25-Nov-20 |
| MTS 04 | Classroom Training Failures of Shafts, Gears and Bearings |
8th, 9th, & 10th Dec 2020 | 8.30 to 5.30 pm | 9th Nov 2020 | 25-Nov-20 |
| CL01 | Virtual Learning Crane Design in accordance with EN13001 series of standards |
14th-18th Dec Mon - Fri (5 Days) |
2.00pm to 6.00pm | 13-Nov-20 | 1- Dec-20 |
| FA03 Final Run |
Virtual Learning Design process for metal additive manufacturing |
15, 16 & 17 Dec Tue, Wed & Thu (3 Days) |
Day 1 & 2 3:00pm - 5:00pm, (with short break) 5:30pm - 7:30pm Day 3 3:00pm - 5:00pm |
16-Nov-20 | 02-Dec-20 |
| MTS 01 | Classroom Training Corrosion Engineering Course |
TBA (2 Days) |
8.30 to 5.30 pm | TBA | TBA |
| MTS 02 | Classroom Training Failure and Damage Mechanisms of Pressurized Equipment in General Industries (with Reference to API 571) Part I (2-day) |
TBA (2 days) |
8.30 to 5.30 pm | TBA | TBA |
| MTS 03 | Classroom Training Failure and Damage Mechanisms of Pressurized Equipment in Refining/Petrochemical Industries (with Reference to API 571) Part II (1-day) |
TBA (1 Day) |
8.30 to 5.30 pm | TBA | TBA |
| MTS 07 | Classroom Training Composite Materials - from Manufacturing, RLA to Failure Analysis |
TBA (2 Days) |
8.30 to 5.30 pm | TBA | TBA |
| MTS 08 | Classroom Training Failure Analysis and Investigation |
TBA (2 Days) |
8.30 to 5.30 pm | TBA | TBA |
| K 72 | Classroom Training Threaded Assemblies Essential Design Rules |
TBA | 8.30 to 5.30 pm | TBA | TBA |
| RDM 01 | Classroom Training Material Resistance and Sizing Level 1 – Basic applications |
TBA (3 Days) |
8.30 to 5.30 pm | TBA | TBA |
| M 12 | Classroom Training Tribology: Friction, Wear and Lubrication of Mechanical Organs |
TBA (2 Days) |
8.30 to 5.30 pm | TBA | TBA |
| F 06 | Classroom Training Cleaning and Cleanliness of Parts - Be Competitive |
TBA (2 Days) |
8.30 to 5.30 pm | TBA | TBA |
| FA 11 | Classroom Training Additive Manufacturing: How to integrate it into your production |
TBA (2 Days) |
8.30 to 5.30 pm | TBA | TBA |
| M53 | Classroom Training Painting and decoration of plastic and composite parts |
TBA (3 Days) |
8.30 to 5.30 pm | TBA | TBA |
| L67 | Classroom Training Tight Bolted Joints Using EN 1591 Design Method |
TBA (2 Days) |
8.30 to 5.30 pm | TBA | TBA |
| EF 01 | Classroom Training Structure Analysis Initiation with Finite Element Model |
TBA (3 Days) |
8.30 to 5.30 pm | TBA | TBA |
| FA 88-3 | Classroom Training Additive Manufacturing: Qualification – Laser Beam Melting |
TBA (3 Days) |
8.30 to 5.30 pm | TBA | TBA |