Version 6.5 of the leading bolted joint software includes a module to convert an analytical project into a finite element project, which can be used without advance knowledge in this field.
OGA 2023 will take place from 13 – 15 September at Kuala Lumpur Convention Centre, marking its 19th edition as Southeast Asia’s largest trade show for the oil, gas and petrochemical engineering industry.
Gastech is at the heart of the natural gas, LNG, hydrogen, low-carbon solutions, and climate technology conversation. A landmark event in the energy industry’s calendar for over 50 years, Gastech 2023 is the world’s largest meeting place for natural gas, LNG, hydrogen, low-carbon solutions, and climate technologies.
The Institute of Materials, Malaysia (IMM) is organizing a Conference on Materials Failure Investigation in conjunction with the International Conference on X-rays & related Techniques in Research & Industries 2023 organized by Universiti Teknologi Malaysia (UPM).
Cetim offers manufacturers the use of its equipment and expertise for scanning, reverse engineering and the creation of added value based on the generated digital models. In this article, read an interview with our experts on the broad needs of manufacturers in scanning in all aeras, and the Centre’s strengths in meeting them.
The new machine acquired by Cetim will break records in tape laying speed for the production of composite tanks. Its core area of focus is the manufacture of hydrogen tanks for clean mobility.
Corrosion is one of the main causes of failures in the Oil & Gas industry. Cetim’s failure analysis experts, including Alexandre Romaine – corrosion engineer, help manufacturers to manage this complex issue.
Discover the “value chain” training approach offered by Cetim to anticipate the upskilling of employees and guarantee controlled management of training plans.
Cetim introduces a new way of approaching employee skills development by offering a value chain view of training. This new approach allows companies to quickly visualise all the training and skills required to successfully integrate plastics and composites into their applications.
Besides the product or system breakage aspect, the methodologies of failure analysis can be used as part of a risk management approach and a real driver of progress.
A custom-made test bench has been developed by Cetim to assess the performance of a 200-mm diameter turbine designed by TotalEnergies.
RH, the designer and manufacturer of compact, customised hydraulic connections for mobile machinery, enlisted Cetim’s assistance to completely re-engineer its brazing processes.
Cetim and its partner TIC Group, a leading technical inspection and testing body, to present their innovative engineering solutions & services to serve the Oil & Gas market at…
Singapour a développé une base industrielle diversifiée, occupant une position de leader dans des secteurs tels que l’aéronautiqu…
This AM Webinar, organised by Cetim-Matcor, aims to provide decision-makers and engineers with the necessary technical and economic background on the major metal AM processes (over 7), allowing them to make strategic and educated decisions on which technology is best suited for their business.
The hydrogen leak-tightness of VAM® screwed connections designed by Vallourec was validated on a test bench using a leak detection method meeting safety requirements and taking into account the volatility of this highly flammable gas.
Discover a customized support throughout the entire value chain, from innovation to recycling and training, to improve the performance of your products!
A custom-made test bench has been developed by Cetim to assess the performance of a 200-mm diameter turbine designed by TotalEnergies.
The 1st edition of the International Metal Additive Manufacturing Symposium at Cetim, Senlis, France.
13 Dec 2021, Cetim-Matcor and Antea have entered a strategic partnership to provide innovative and comprehensive Risk-Based Inspection (RBI) solutions to their clients in Singapore and the Asia Pacific region.
When it is embedded on a drone, the Skipper NDT magnetic inspection solution provides high performance speed, enables access to hard-to-reach areas and protects the safety of operators in the field.
When it is embedded on a drone, the Skipper NDT magnetic inspection solution provides high performance speed, enables access to hard-to-reach areas and protects the safety of operators in the field.
Industry 4.0 To prepare their students for the world of tomorrow, the University of Hyogo Japan has chosen Cetim as …
A new training session has been added to the Cetim Academy catalogue, focusing on the techniques used to effectively model …
Learning to combine fatigue analysis with finite element calculations
On the agenda: 13 free webinars open to everyone, to discover or review the latest progress in the key technologies …
The programme of the Cetim Academy International Web-discoveries for 2021 is now online!
PaCE@NTU and Cetim collaborate to strengthen the knowledge of mechanical industries with specific series of professional training The Centre for …
Parker Hannifin carefully selected the characteristics of the components of its new range of motor-driven air-oil heat exchangers. The acoustic …
Kuala Lumpur, 22 February 2021 – The Malaysian Investment Development Authority (MIDA) is partnering with CETIM (the French leading Technical Centre …
GOING FOR THE FUTURE … Cetim, the French Technical Centre for Mechanical Industries, was established in 1965 to support innovation …
TechnipFMC and Cetim signed a technological collaboration agreement to support TechnipFMC ongoing effort to develop new generations of flexible composite …
This seventh electrodynamic vibrator extends Cetim’s shock and vibration testing capabilities. Watch this video for a detailed description of its …
Following the success of the operation launched in May 2020, and to respond to the needs of International companies, Cetim …
Cetim Academy training web-discoveries and virtual classes available now in English !
The ninth edition of Fatigue Design is scheduled to take place on 17 and 18 November 2021 in Senlis, France. …
It’s official! The next edition of FAN, the international conference on “fan noise, aerodynamics, applications and systems” will be held from 14 to …
Explore new advanced solutions for your manufacturing needs – from low-volume prototyping to mid-volume runs of complex metal parts ! Cetim, …
Cetim and Desktop Metal partner to accelerate the adoption of global Metal Additive Manufacturing
The new version of Cetim Cobra, the world leader for bolted joint design and failure analysis has been released! This …
Cetim Cobra: new version of the powerful solution for bolted & secured joint analysis
Due to the Covid-19 pandemic, OTC has chosen to postpone the conference from 4–7 May to the third quarter of …